8 (775) 007-08-74

    klient@teplolux-aes.kz

I-WARM 730

730 1

730

zonal thermostat I-Warm 730 is used for control of two heating zones simultaneously (eg, suite & ndash; kitchen) with indication of the floor temperature in every room protection against emergency situations. Large backlit graphic display and 3 control buttons. A friendly "intuitive" interface "one touch". Display of the current floor temperature, temperature control, incl. / Off. heating condition. Switching between heating zones by pressing a single button. Self-test the heating system with a warning information. electricity savings in heating up to 30%. Especially recommended to set the thermostat I-Warm 730 in the case where the use of two regulators or impractical due to unacceptably small sized wall. For example, bathroom and toilet.

Technical specifications of thermostat I-WARM 730

Power supply 220 B
The maximum load current is 2x8 A
Power consumption 0,45 W
weight 200g
Dimensions 116h82h54 mm
Save settings when Disable. Power 12 months.
Protection IP20
Remote floor sensor NTC 6,8 kOhm
The length of the sensor cable 2m
Maintain temperature + 5 a C to +45 a C
factory setting + 25 a C

I - WARM 710

710
710 1

Designed to continuously maintain the set temperature on the floor sensor. Large backlit graphic display and 3 control buttons. A friendly "intuitive" interface "one touch". Display of the current floor temperature, temperature control, on / off. heating condition. Self-test the heating system with a warning information. An additional mode that allows display the ambient temperature (the control is on a floor sensor, it's just an additional opportunity to use the device as a thermometer with digital indication). Additional heating temperature control mode measurements - taken per unit time 1 hour. Time on and off. heating condition set by the user as a percentage. Range - 10% to 90%

Specifications

Power supply 220
The maximum load current is 16A
Power consumption 450 mW
weight 150 g
Dimensions 80h80h52 mm
Save settings when the power is off 12 months.
Protection IP20
Remote floor sensor NTC 6,8 kOhm
The length of the sensor cable 2m
Built-in temperature sensor NTC 6,8 kOhm
Maintain temperature from +5 0 C to +45 0 C
factory setting +25 0 C

I - WARM 720

720
    • 2 in 1 floor temperature indication and temperature display
    • Protection from emergency situations
    • Large graphic display
    • Easy management - ONE TOUCH system
    • Self-diagnosis

Room thermostat with 2 temperature sensors - remote floor sensor and built-in air temperature sensor. The device allows you to reduce power consumption zanchitelno underfloor, by maintaining a comfortable temperature only in the specified time intervals only when necessary. Large backlit graphic display and 3 control buttons. A friendly "intuitive" interface "one touch". The built-in menu, you can manage all the functions (similar to a mobile device). Built-in mounting. Multimode thermostat with a built-in real-time unit and calendar. Integrated economizer. The device collects and stores all the information about the heating system, which allows the user to kontrolrovat their costs without sacrificing comfort. "Intellektualnoe" software, which determines the characteristics of thermal processes premises. You can specify only the time slots when it needs heating, the device takes care of all the. Additional functions - Clock, Calendar. Allows you to implement the following control methods:

a) Constant comfort temperature

b) The daily cycle of time distribution of comfortable temperature. The user specifies the time intervals during the day, when he needs a warm floor. The device is adjusted to the room determines its own thermal characteristics and opredzhelyaet on time with the calculations in order to achieve a comfortable temperature set strictly at the specified time. All the rest of the heating is switched off, thus saving electricity. The program is executed with the daily cycle.

c) The weekly cycle. Completely analogous to variant B, only the cycle is 1 week, with any programming for each day of the week.

Specifications

Power supply 220
The maximum load current is 16A
Power consumption 0,45 mW
weight 150 g
Dimensions 80h80h52 mm
Save settings when the power is off indefinitely
Protection IP20
Protection Index II
Remote floor sensor NTC 6,8 kOhm
The length of the sensor cable 2m
Built-in temperature sensor NTC 6,8 kOhm
Maintain temperature +5 ° C to +45 0 C
factory setting +25 0 C

RoomStat 111

RoomStat111
  • Versatility
  • The simplicity and reliability
  • For the comfort

The room thermostat with floor to connect an external temperature sensor and spaced controls - on / off the device and adjust the set temperature. Built-in mounting. Designed to continuously maintain the set temperature. Comfortable temperature setting knob, the LED switch-on, visual graphic information key on / off.

Specifications

Power supply 220 (+ 10 … -15)%
The maximum load current is 16A
weight 150 g
Dimensions 80h80h52 mm
The floor sensor thermistor
The length of the sensor cable 2m
Sensor Location built-in air
The sensor resistance 6,8 kW at 25 0 C
Color White